Zorb® Microfiber Terry Plus Silver Fabric (W-216)

SKU: AK-2906-Swatch
Regular price
$2.00 USD
Sale price
$2.00 USD
Regular price
$0 USD
Sold out
Unit price
Quantity must be 1 or more
Black ❤️
50 Yards Roll

  • 100% Free of PFOS, PFOA, lead, dioxins, heavy metals & BPA; Free from phthalates: contains no DEHP, DBP, BBP, DINP, DIDP and DnOP. Read Blog Article

  • Super soft and super absorbent, this heavyweight, double-sided microfiber terry is made of special filaments that are three times finer than silk.

  • Absorbs 8 times its weight in under 2 seconds and soaks up 20 times faster than other material (bamboo, cotton, hemp knits)

  • Features SILVADUR™ Antimicrobial to inhibit the growth of bacteria, fungi and algae on the fabric, control bad odors and provide intelligent freshness protection.

  • SILVADUR® is proven to be safe against the skin. Tests of bamboo, cotton and polyester treated with 10 times the recommended amount of SILVADUR® found no skin irritation or sensitization after multiple exposures.

  • The unique construction of the fibers greatly increases moisture distribution & holding capacity

  • When cutting, use a sharp knife or scissors as the fabric can easily fray. If you prefer to pre-wash, serge all sides to prevent unraveling of threads

  • Number one choice worldwide for making towels, wipes, soaker pads, doublers, insert layers and many other incontinence products

  • CPSIA certified, meeting stringent standards by the U.S. Consumer Products Safety Commission on lead and phthalates and flammability.

  • All Zorb fabrics are super absorbent by virtue of their knitting construction; they are not made with SAP (super absorbent polymers), so their super absorbency lasts for the lifetime of the fabric.

  • All Zorb fabrics are designed with the ability to exponentially increase their absorbency; use multiple layers of Zorb to supercharge your products' absorbency.


Country of Origin: Made in USA
🇺🇸 Learn Why Oeko Tex Certification is NOT Relevant to American Made Fabrics

Manufacturer: AKAS Tex

Fabric Content: 100% polyester
📚 Read about Fiber Content for Fabrics - Labeling Made Easy

Fabric Weight: 310 GSM / 9.2 ounces per square yard

Fabric Width: 62" - 65" wide / 157 cm Wide - 165 cm Wide

Fabric Thickness: 0.055 inch +/- 10%

Approx. Shrinkage (Length): 1% - 2%
Approx. Shrinkage (Width): Minimal

Approx. Stretch (Length): Minimal
Approx. Stretch (Width): 5%

UPF Rating: 50+
☀️ Read about UV Protection in Fabrics - Your Total UPF Rating Guide

Important Note about UPF Ratings:
Ultraviolet Protection Factor (UPF) indicates how much UV radiation (both UVB and UVA) a fabric allows to reach your skin. For example, a UPF 50 fabric blocks 98 % of the sun’s rays and allows 2% (1/50th) to penetrate, thus reducing your exposure risk significantly. A UPF 30 fabric blocks 97% of UV rays and allows roughly 3% of UV transmission. UPF 15 indicates that the fabric blocks roughly 93% of UV rays and allows about 7% of available UV radiation to pass through.

UPF 10 to 30 = Fair Protection
UPF 30 to 50 = Good Protection
UPS 50+ = Excellent Protection

Quantity Information: Quantity = number of continuous yards., Orders of more than 10 yards may ship in more than 1 piece. If you would like a continuous piece, please leave a comment & we will try to accommodate your request., Seconds quality material may not ship in completed lengths. They may be in several cut pieces not less than 18" or so.


Care Instructions: No prewash, Wash medium, Serge open sides before washing, Dry low, No Fabric softener, No Bleach, No Chlorine
Read about the 7 Reasons Your Fabric Could Break Down - Fabric Care Made Easy

Important Note about Sharp Blades when cutting Microfiber Terry Fabrics
Microfiber terry Plus is a unidirectional knit. It has to be cut using a very sharp blade and one with no nicks or burrs. If not it can fray very easily and seemingly tear apart. That is somewhat like in knits when you pull at one stitch the entire line unravels. Typically it frays when cut from the leading edge. This is the edge where the blade can catch on to one stitch and it gets pulled apart in what looks like a tear. If this happens use a different blade or sharp scissors, and try cutting from the other sides. One edge is typically more fragile and prone to unraveling than the other three. When we cut the MFT Plus for orders we make sure to sharpen the cutter blade first. And if it still gets caught while cutting we use a new blade for cutting. This is also the reason why it is not recommended to pre-wash the fabric before sewing. Fibers from the leading edge can get caught in anything sharp and unravel the fabric completely.

Additional Care Instructions:
  • It is not recommended to pre-wash before sewing. If you prefer to pre-wash, serge (or sew/finish) all open edges to prevent unraveling of threads. However it is recommended to wash before using it.

  • Liquid detergent is preferred over powder because there is a chance that the powder will not dissolve completely and in that case the powder will be stored inside the microfiber. This risk is compounded if cold water is used. Remember, microfibers tend to hold everything, so use half the quantity of detergent you would normally use.

  • Never wash with fabric softeners. The microfiber will accumulate the softeners and over a period of time, will be saturated with it, reducing its efficiency.

  • Never wash the microfiber with other terry or other fabric which has lint. The microfiber will treat lint or any other fibers and dirt particles and store the particles inside the microfiber reducing its efficiency.

  • Do not wash with anything sharp or with anything that has hook tape. Sharp objects can snag the loops and cause them to run. Hook tape will attach to the loops and tear the fabric.

  • Never dry the microfiber in a dryer on high heat. It could actually melt the fibers with excessive heat and lock the traps. Dry on low heat and permanent press is the best setting.

Choose Your Own Custom Color Pre-Order Program

It's simple: You pick the fabric and choose your own color. Then, we make it right here in the USA.
MOQ: 1,000 yards
Price: Varies by fabric
Learn More

Choose Your Own Fabric Print Pre-Order Program

It's simple: You pick the fabric and send us your own print art work. Then, we manufacture it right here in the USA.
MOQ: 50 to 100 yards
Price: Varies by fabric
Learn More

Go to full site